Dependable cooktop repair for gas, induction, and electric cooktops across Larchmont and the surrounding metro.
Gas, induction, and electric cooktops each fail in their own way, so the first step is knowing which technology is in front of us. A gas cooktop that clicks without lighting usually has a misaligned cap or a fouled igniter, and a burner burning yellow points at clogged ports or an air-shutter adjustment. An induction cooktop has no flame at all, so a fault there shows up as a zone that will not recognize pans or throws an error tied to a coil or control board.
Electric radiant cooktops bring their own elements and switches into the mix. Because a cooktop sits in the countertop, we work cleanly and protect the surround while servicing it. We confirm the specific burner, coil, or control at fault and fit genuine OEM parts so every zone lights or heats the way it should.
What We Fix
- Induction coil and inverter-board service
- Surface-element and burner repair
- Spark-igniter and valve service on gas units
- Touch-control and glass-sensor repair
- Error-code diagnosis and reset
Have a cooktop problem?
Common Problems
- An induction zone that will not recognize pans
- A burner clicking without catching
- An element heating on and off
- A cooktop that shuts down mid-use
- Touch controls that are locked or unresponsive
Typical Causes
- Cracked glass or a failed surface sensor
- An inverter or power board fault on induction units
- Clogged burner ports or a dead spark igniter
- Loose wiring or a tripped internal limit
- An engaged control lock or a touch-panel fault
Brands We Service
We service gas, induction, and electric cooktops across every brand in our roster. On the cooktop side that means Sub-Zero and Wolf work most, alongside Thermador, Miele, Bosch, and the rest of the luxury lineup.
Error and Fault Reference
Below are the indications we meet most on gas, induction, and electric cooktops. Each one narrows the cooktop to a circuit, and we confirm the true cause with hands-on testing before a part goes in.
| Code | What It Means | What We Check |
|---|---|---|
F / E codes | Induction inverter fault | Read the code, test the board and coil |
Overheat | A zone shut down on high temperature | Check the cooling fans and sensor |
No spark | A gas burner that will not light | Inspect the igniter, switch, and electrode |